HomeProductsCorrosion Resistance Coating

Corrosion Resistance Coating

Corrosion Resistance Coating

Using the Repair System suggested and provided by Global Enterprises, you can do repairs and maintenance jobs everywhere on your vessel. Plastic steel has the advantage that it cannot corrode, you can apply it anywhere and after curing it can be machined just like metal.

View Full Catalog

Wencon Cream

Wencon Cream

Wencon Cream is a basic two-component, epoxy compound with a wide range of applications for repair and rebuilding of worn, damaged, cracked and corroded metal parts.

Typical Applications are corroded tanks, pump housings, impellers, valves, pipes, flange faces, roller bearing seats, worn shafts, hydraulic rams and heat exchangers. Wencon Cream is also excellent as a filling component.

Heat resistance ranges from 60° C in corrosive and heavy load environments and upto 250° C when applied as a filling compound. View Catalog

Wencon Rapid

Wencon Rapid

Wencon Rapid is a fast curing, two-component, epoxy compound with a wide range of applications for emergency repairs and maintenance.

Typical applications are emergency repairs where a short curing time is required to reduce down time. Wencon Rapid is very suitable for applications where thicker layers of material are required as the compound quickly sets and becomes solid. The compound can also be used for regular maintenance jobs and as a filling compound.

Heat resistance ranges from 60° C in corrosive and heavy load environments and upto 250° C when applied as a filling compound. View Catalog

Wencon Coating

Wencon Coating

Wencon Coating is a two-component, liquid epoxy coating suitable for a wide range of applications. It provides a smooth non porous surface, which is resistant to bi-metallic corrosion, light chemical aggression, corrosion and erosion as well as impingement.

Typical applications are coating of surfaces rebuild after deterioration, protection of tanks, pumps, valves, wet liners, cooler end covers etc. against corrosion and bi-metallic corrosion as well as a variety of small and large repair and maintenance jobs.

Heat resistance ranges from 90° C in corrosive and heavy load environments and upto 250° C when applied as a filling compound. View Catalog

Wencon Hi-Temp

Wencon Hi-Temp

Wencon Hi-Temp is a high performance two-component, liquid epoxy coating developed for applications in high load areas. It provides a smooth non porous surface, which is resistant to high temperatures, strong chemical aggression and wear as well as bi-metallic corrosion.

Typical applications are coating of surfaces rebuild after deterioration including repair of lining on insert gas systems, fresh water generators, hot pipes and heating coils, protection of tanks, pumps and valves against chemical and mechanical aggression, corrosion and bi-metallic corrosion.

Heat resistance ranges from 160° C in corrosive and heavy load environments and upto 300° C when applied as a filling compound. View Catalog

Wencon Putty

Wencon Putty

Wencon Putty is a very quick curing, two component, epoxy compound supplied in a practical and easy to use stick format.

The multipurpose epoxy paste is ideal for wide range of emergency repairs where an ultra quick curing and mouldable compound is required. Typical applications are patching sealing and filling of cracks, leakages and holes in pipes, on flanges, in tanks etc.

Heat resistance ranges from 60° C in corrosive and heavy load environments and upto 250° C when applied as a filling compound. View Catalog

Wencon Pipe Tape

Wencon Pipe Tape

Wencon Pipe Tape is a fast curing pipe repair bandage especially formulated to make quick and effective rapairs of cracks, leaks, fractures, and corrosion porosity in piping carrying water, oil, steam, most gases and even solvents. Wencon Pipe Tape has good pressure, temperature and chemical resistance.

Wencon Pipe Tape is a pre impregnated fiberglass bandage ready for use after soaking in water for 10 seconds. After 10 minutes cure the bandage hardens and the pipe can usually be reactivated. The bandage is fully cured within 1 hour. View Catalog

Wencon Exhaust Repair Kit

Wencon Exhaust Repair Kit

Wencon Exhaust Repair is a one component steel cold weld product that can be used to repair cracks and holes in equipment that is exposed to temperatures upto 1300° C.

Typical applications include engine heads, blocks and manifolds, as well as furnaces and boilers. Wencon Exhaust Repair is especially valuable in areas and situations where traditional heat welding cannot be accomplished. View Catalog

Wencon UW Cream

Wencon UW Cream

Wencon UW Cream is a two component cream to be applied under water or on wet surfaces. Wencon UW Cream cures at room temperature. After curing Wencon UW Cream will exhibit a wide range of the characteristics of metal, which together with a good adhesion makes the system not suitable as a repair compound for repairing corroded and worn metal. Wencon UW Cream is non conducting and can neither corrode or bi-metallic corrode.

Typical applications are corroded ship hulls and other underwater parts of ships and/or structures, tanks, pipes, flange faces. It is also excellent to filling gaps under water or on wet surfaces. View Catalog

Wencon UW Coating

Wencon UW Coating

Wencon UW Coating is a two component product, to be applied under water and curing at room temperature. After curing, Wencon UW Coating will provide a smooth, non-porous coating, which is resistant to bi-metallic corrosion, light chemical attack, corrosion and impingement. Wencon UW Coating contains no solvents.

Typical applications are coatings of steel surfaces rebuilt with Wencon UW Cream, and coatings under water - like ship hulls and/or other submerged structures, tanks, pipes and other under water items to be protected against corrosion or bi-metallic corrosion. View Catalog

Wencon Accessories

Wencon Accessories

Wencon Accessories are high quality products carefully selected and designed to contribute to making your repair application successful. During an emergency repair, or when planning a scheduled repair or maintenance job, it is important to make sure that you have all the necessary components, tools and aids required at hand before you start.

The application data sheet in the Wencon Repair Manual clearly lists all the products required for the individual application. View Catalog

Wencon Repair Kits for Marine

Wencon Repair Kits for Marine

Wencon Repair Kits are available in different sizes, due to the size and age of the vessel.

Covers most aspects of emergency repairs and long lasting maintenance. Suitable for all ships where repairs and maintenance are carried out frequently. View Catalog

Wencon Blaster

Wencon Blaster

Wencon Blasters 88 S and 248 S are compact, very efficient and portable shot blasting units for small and medium size jobs on metal, wood or concrete. You can choose among a wide range of blasing materials including, sand, calcium, glass and Garnet blasing media.

The Wencon Blasters are easy and safe to use. Safety features include remote controls that deprive the equipment of air pressure immediately when the trigger is released. The safety valve, also protects against any pressure suges, over the required working pressure. View Contact

Training & Seminars

Great Docs and SupportWe arrange SEMINARS on innovative and latest developments in industrial field by engaging our partners.

Read more...

  • Image 1 Caption
  • Image 2 Caption
  • Image 3 Caption

Downloads

Native RTL SupportWe are pleased to offer you a comprehensive range of downloadable PDF version of our catalogs.

Read more...