Die Temperature Control Fitting

Fluid medium	Air, Water (Clean water/Conditional*)	Heat medium oil (Conditional*)
Max. operating pressure	0.9MPa
Max. vacuum	-100kPa
Operating temp. range	0~60ºC(No freezing)	0~99ºC(No freezing)	0~120ºC(No freezing)

Fluid medium

Air, Water (Clean water/Conditional*)

Heat medium oil (Conditional*)

Max. operating pressure

0.9MPa

Max. vacuum

-100kPa

Operating temp. range

0~60ºC(No freezing)

0~99ºC(No freezing)

0~120ºC(No freezing)

Description

Tube O.D. (mm)	ø6, ø8, ø10, ø12

Taper pipe female screw	Rc1/8, Rc1/4, Rc3/8

Tube I.D.	1/4, 3/8

Taper pipe male thread	R1/8, R1/4, R3/8, R1/2

Molding Die Temperature control coupling
Push the release sleeve and remove the joint part, then you see no projection on the die.

Nickel-plated brass is used for the metal body and HNBR for the seal material.Thermal oil, clean water and air can be admitted.

- Fitting part can be removed from thread part.Prepare the molding die according to the thread size, bury the threaded part in the die, using an Allen wrench, and then just fit in the joint part. Push the release sleeve and remove the joint part, then you see no projection on the die.

With the stop valve built-in type, the fluid (e.g. hot water ) does not spill at the installation or removal of the joint.