Vacuum Generator VQ

Fluid medium	Air (JIS B 8392-1：Class1.2.1~2.4.3 compliant)
Operating pressure range	0.3~0.7MPa
Operating temp. range	5~50ºC (No freezing)
Operating humidity range	35~85%RH (No freezing)
Vibration /Impact resistance	Max. 50m/s² / Max. 150m/s²
Protective structure	Equivalent to IEC IP40
Lubrication	Not required
Proof pressure (Air supply circuit)	1.05MPa
Proof pressure (Vacuum circuit)	0.2Mpa

Fluid medium

Air (JIS B 8392-1：Class1.2.1~2.4.3 compliant)

Operating pressure range

0.3~0.7MPa

Operating temp. range

5~50ºC (No freezing)

Operating humidity range

35~85%RH (No freezing)

Vibration /Impact resistance

Max. 50m/s² / Max. 150m/s²

Protective structure

Equivalent to IEC IP40

Lubrication

Not required

Proof pressure (Air supply circuit)

1.05MPa

Proof pressure (Vacuum circuit)

0.2Mpa

Description

MM size (mm)	ø8, ø10

MM size (mm)	ø6, ø8, ø10

31.5mm wide vacuum unit is designed to optimize the control of large vacuum flows.

- The twin-nozzle type is the most durable unit for applications with longer suctioning or transportation time.The large nozzle controls vacuum generation from start up to a prescribed reference preset pressure level, after which the small nozzle takes over for maintaining a vacuum level. This combination makes possible substantial reductions in Air consumption.
  Only one signal is used for vacuum generation as with previous models

The two-stage nozzle type’s vacuum suction rate has been increased by approximately 40% compared to conventional types.The vacuum suction rate has been increased by 40% compared to PISCO Vacuum Generator complex type with single nozzle.

With the pressure sensor, the cost-effectiveness has been pursued (in-house comparison) and a high level of visual recognition has been realized.All settings can be made using just three push buttons.
Four different display units are available.

The single-nozzle type is an orthodox, complex vacuum generator designed to produce large vacuum flows.

A wide variety of valve type is standardized.・Single-nozzle type：Normally open, Normally closed, Double solenoid (retention) type・Two-stage nozzle type : Normally open, Normally closed type・Twin-nozzle type : Normally closed type