External Vacuum Controller VXP and VXPT

Fluid medium	Air (JIS B 8392-1：Class1.2.1~2.4.3 compliant), Vacuum
Operating pressure range	0.3~0.7MPa
Working vacuum range	-100~0kPa
Operating temp. range	5~50ºC (No freezing)
Operating humidity rang	35~85%RH (No freezing)
Vibration /Impact resistance	Max. 50m/s² / Max. 150m/s²
Protective structure	Equivalent to IEC IP40
Lubrication	Not required
Proof pressure (Air supply circuit)	1.05MPa
Proof pressure (Vacuum circuit)	0.2Mpa

Fluid medium

Air (JIS B 8392-1：Class1.2.1~2.4.3 compliant), Vacuum

Operating pressure range

0.3~0.7MPa

Working vacuum range

-100~0kPa

Operating temp. range

5~50ºC (No freezing)

Operating humidity rang

35~85%RH (No freezing)

Vibration /Impact resistance

Max. 50m/s² / Max. 150m/s²

Protective structure

Equivalent to IEC IP40

Lubrication

Not required

Proof pressure (Air supply circuit)

1.05MPa

Proof pressure (Vacuum circuit)

0.2Mpa

Description

MM size (mm)	ø3, ø4, ø6

	Stand-alone type	Manifold type
MM size (mm)	ø3, ø4, ø6	ø4, ø6, ø8, ø10

	Stand-alone type	Manifold type
MM size (mm)	ø3, ø4, ø6	ø4, ø6, ø8, ø10

The response characteristics of supply valve is maximized to realize a high-cycle vacuum system.

Three-port specification has been added to the lineup of external vacuum controller. By adopting a three-way vacuum supply main valve, vacuum release time is drastically shortened.Since the conventional two-way valve (VXP type) operates to maintain the vacuum immediately after the main valve is shut off, only blow-off air contributes to releasing vacuum. In the newly commercialized three-port specification (VXPT type), however, the atmospheric pressure is introduced when shutting off the main valve to break vacuum using the atmospheric pressure plus blow-off air.

- Two types of vacuum switch are prepared.As for vacuum switch with good visibility LED, 2 switch output type, analog output & 1 switch output and low cost analog output type are available.

“No copper alloy” and “Low level ozone resistance” specifications are available. (Only for VXP type)No copper alloy is applied for metal parts and low level ozone resistance is considered for seal material.